As an Amazon Associate, I may earn from qualifying purchases.
**Price and promotions are accurate at the time of posting but can change or expire at anytime.**
Kolink Inspire Series K12 Midi Tower ARGB Gaming Case Black Window
With the Kolink Inspire K12 MidTower PC Case, you no longer have to choose between aesthetics and airflow. This chassis is the first from the Kolink Inspire Series to integrate both ARGB lighting and airflow features into one model. Enjoy vibrant lighting from the preinstalled Kolink Umbra S ARGBPWM 120mm fan and the two LED strips illuminating the front mesh panel. Plus, with support for up to ATX motherboards, 330mm long GPUs, and watercooling systems, this PC case is perfect for housing powerful gaming hardware.
Kolink Inspire Series K12 ARGB Mid Tower PC Case at a Glance
Midtower PC case with mesh front panel and ARGB LED strips
Support for up to ATX motherboards and 330mm long GPUs
One preinstalled Kolink Umbra S ARGBPWM 120mm fan
Accommodates up to four storage drives
Magnetic, hinged tempered glass half panel for easy access
Fully featured IO panel including USB 3.1
Inspirational AestheticsThe Kolink Inspire Series is known for its bold aesthetics, bright RGB lighting, and allaround stylish good looks. The Kolink Inspire K12 MidTower PC Case fits the trend, but is the first of the series to focus on airflow in equal measure. The front panel features mesh panelling, accented by two ARGB LED strips. This lighting is paired with a preinstalled Kolink Umbra S ARGBPWM 120mm fan, mounted upon the back panel. Both these devices can be synced and controlled utilising the reset button or compatible motherboard software.
Forming the perfect backdrop to this lighting is the classic matte black finish on the metal frame. To showcase your highend hardware, the Kolink Inspire K12 has a halfpanel tempered glass door, hinged for easy access and held in place with magnets instead of screws. This panel is also tinted, for a sophisticated finish.
Inspired AirflowIn addition to the mesh panelling, the Kolink Inspire K12 has extensive support for both air and watercooling, as well as a fully ventilated PSU shroud. The front panel can support either three 120mm or 140mm fans. Alternatively, radiators up to 360mm long can be mounted here instead. Upon the ceiling there is space for two fans of either size or a slim 240mm radiator, and smaller. The preinstalled 120mm fan rests on the rear panel and can be replaced with a radiator of the same size. Whats more, there are two 120mm fan mounts on the PSU shroud, to further enhance the cooling in that secondary chamber. Finally, there is clearance for CPU coolers up to 160mm tall.
Hardware InspoThe Kolink Inspire K12 is more than just a beautiful PC case. This chassis is intelligently designed to support an astounding range of gaming hardware. The backplate can accommodate motherboards in ATX, MicroATX, and MiniITX form factors, with seven PCIe expansion slots on the rear panel. There is clearance for GPUs up to 330mm in length, ensuring the chassis compatible with a wide selection of graphics cards that are currently available. The ventilated PSU shroud has space for power supplies up to 180mm long.
For storage, up to four drives can be installed within the Kolink Inspire K12. There are two brackets that can support either 2.5 SSDs or 3.5 HDDs, as well as two removeable SSD trays on the back of the motherboard plate. This allows for a flexible storage solution that is both fast and has ample capacity.
Inspire FunctionalityTo make cable management easier, the Kolink Inspire K12s IO panel is mounted on the side. This allows for better cable routing to the motherboard. This IO panel includes two USB 2.0 and one USB 3.1 port, along with an HD audio jack.
Helping to prevent dirt build up, the Kolink Inspire K12 MidTower PC Case is equipped with two dust filters. The first is located on the top panel and is magnetic, to enable you to easily remove and clean the filter. The second dust filter is found at the bottom of the chassis.
